|
|
|
|
|
|
|
Spotlight: |
|
|
- 54M Wireless LAN Router, 2.4GHz, 802.11g/b, built-in 4-port Switch
- Adopts 2x to 3x eXtended Range™ technology
- Supports WIFI Internet Access (WISP), Supports WDS
- Supports Time-based Access Control
- Detachable Antenna (reverse SMA connector)
|
|
|
|
The DWR-G541R 54M Wireless AP Client Router integrates 4-port Switch, Firewall, NAT-router and Wireless AP. Its design is dedicated to Small Office/Home Office (SOHO) wireless network solutions. The DWR-G541R 54M Wireless AP Client Router allows you to connect your network wirelessly better than ever, share the Internet access, files and fun, easily and securely.
The DWR-G541R 54M Wireless AP Client Router provides 2 operation modes for multi-user to access the Internet: AP Client Router mode and AP Router mode. In AP Client Router mode, you can access the Internet wirelessly with the support of a WISP. In AP Router mode, it can access the Internet via a Cable/DSL Modem.
In the most attentive wireless security, the DWR-G541R 54M Wireless AP Client Router provides multiple protection ways. In AP Router Mode, it can be set to turn off the wireless network name (SSID) broadcast so that only stations that have the SSID can be connected. The router provides wireless LAN 64/128/152-bit WEP encryption security, WPA/WPA2 and WPA-PSK/WPA2-PSK authentication, as well as TKIP/AES encryption security. It also supports VPN pass-through for sensitive data secure transmission.
The DWR-G541R 54M Wireless AP Client Router provides flexible access control in AP Router mode so that parents or network administrators can establish restricted access policies for children or staff. It has built-in NAT and DHCP server supporting static IP address distributing. It also supports Virtual Server and DMZ host for Port Triggering needs, and remote management and log so that network administrators can manage and monitor the network in real time.
The DWR-G541R 54M Wireless AP Client Router is easy-to-manage. Quick Setup is supported and friendly help messages are provided for every step. So you can configure it quickly and share the Internet access, files and fun.
- Supports AP Client Router and AP Router operation mode.
-
Supports WIFI Internet Access (WISP).
-
Supports Wireless Distribution System (WDS).
-
Adopts 2x to 3x eXtended Range.
-
Wireless Data transfer rates up to 54Mbps.
-
Supports 64/128/152-bit WEP, complies with 128 bit WPA standard(TKIP/AES), supports MIC, IV Expansion, Shared Key Authentication, IEEE 802.1X.
-
Supports PPPoE, Dynamic IP, Static IP, L2TP, PPTP and Big Pond Cable Internet Access. (AP Router mode only)
-
Built-in NAT and DHCP server supporting static IP address distributing.
-
Supports UPnP, Dynamic DNS, Static Routing, VPN Pass-through.
-
Supports Parental Control, Virtual Server, Special Application and DMZ host.
-
Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC address filtering.
-
Provides WLAN ACL (Access Control List) (AP Router mode only).
-
Supports configuration backup/restore and firmware upgrade.
-
Supports Web management.
-
Detachable Antenna (reverse SMA connector).
Software Specification |
Standards |
IEEE 802.11g, IEEE 802.11b |
Wireless Signal Rates With Automatic Fallback |
11g: Up to 54Mbps(dynamic)
11b: Up to 11Mbps(dynamic) |
Frequency Range |
2.4-2.4835GHz |
Wireless Transmit Power (MAX) |
19dBm (MAX EIRP) |
Modulation Technology |
IEEE 802.11b: DQPSK, DBPSK, DSSS, and CCK
IEEE 802.11g: BPSK, QPSK, 16QAM, 64QAM, OFDM |
Receiver Sensitivity |
54M: -68dBm@10% PER
11M: -85dBm@8% PER
6M: -88dBm@10% PER
1M: -90dBm@8% PER
256K: -105dBm@8% PER |
Wireless Mode |
AP Router Mode
AP Client Router Mode (WISP Clent)
Bridge mode (point-to-point / point to Multi-point) |
Wireless Range |
Indoors up to 200m, Outdoors up to 830m |
Wireless Security |
SSID Enable/Disable
MAC Address Filter
64/128/152-bit WEP Encryption
WPA/WPA2/WPA-PSK/WPA2-PSK (AES/TKIP) Encryption |
Hardware Specification |
Interface |
4 10/100M LAN Ports(RJ45)
1 10/100M WAN Port(RJ45) |
Antenna |
3dBi Detachable Omni Directional Antenna
(Reverse SMA Connector) |
Power Supply Unit |
Input: Localized to Country of Sale
Output: 9VAC / 0.8A Linear PSU |
Operating Temperature |
0°C~40°C (32℉~104℉) |
Storage Temperature |
-40°C~70°C (-40℉~158℉) |
Relative Humidity |
10% ~ 90%, Non Condensation |
Storage Humidity |
5%~95% Non-Condensing |
Dimensions |
7.0 x 4.5 x 1.1 in. (178 x 115 x 27.5 mm) |
|
|
|