|
|
The DLL-008TL 10/100M PCI Network Adapter is a highly integrated and cost-effective Fast Ethernet Adapter that provides 32-bit performance, PCI bus controller, and full compliance with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX specifications and IEEE 802.3x Full Duplex Flow Control.
The DLL-008TL keeps low cost and eliminates usage barriers. It is easy to upgrade a network from 10Mbps to 100Mbps. It supports both 10Mbps and 100Mbps network speed both in Half-Duplex and Full-Duplex transfer modes, using Auto-Negotiation technology to detect the network speed. It also can be widely used in most modern Operating Systems.
- Supports ACPI, PCI power management
- Supports Full Duplex Flow Control (IEEE 802.3x)
- Auto-setups IRQ and I/O address
- Drivers for NetWare 3.x, 4.x, Windows 95/NT/2000/ XP, Linux
Standards and Protocols |
IEEE 802.3, 802.3u, 802.3x
PCI Revision 2.1/2.2 |
Interface |
32-bit PCI |
Transmission Rate |
10/100Mbps for Half-Duplex mode
20/200Mbps for Full-Duplex mode |
Flow Control |
IEEE 802.3x Flow Control (Full-Duplex) |
Port |
10/100Mbps RJ45 |
Network Media |
10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
EIA/TIA-568 100¦¸ STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100¦¸ STP (maximum 100m) |
LED Indicator |
Link/Act |
Safety & Emission |
FCC, CE |
Environment |
Operating Temperature: 0¡æ~40¡æ (32¨H~104¨H) Storage Temperature: -40¡æ~70¡æ (-40¨H~158¨H) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
Operating System |
NetWare 3.x, 4.x, Windows9x/NT/XP, Linux |
|
|
|